Steering Gear: Remove & Replace

Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
		0.7		B
Combination Procedure: LEVEL CONTROL SYSTEM: Calibrate:
	With Use of Scan Tool.	0.3		B
Combination Procedure: RACK & PINION BOOT: Replace:
Each		0.2		B
Combination Procedure: STEERING ANGLE SENSOR: Calibrate:
	With Use of Scan Tool.	0.3		B
Combination Procedure: TIE ROD &/OR END: Replace:
Outer,Each		0.1		B