Knock Sensor 1 -G61-, Removing And Installing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The Knock Sensor 1 -G61- is located under the exhaust manifold.

Removing

-- Disconnect the connector -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cable -1- from the bracket -2-.

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Bend up the heat shield -2-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -3- and then the Knock Sensor 1 -G61-.

Installing:

Install in reverse order of removal while noting the following:

Tightening Specification

Refer to OVERVIEW - IGNITION SYSTEM