Front Peripheral Camera -R243-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment.

-- Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release and disconnect the connector -7-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -5-.

-- Release the retaining tab -6- from the cover -1-.

-- Remove the cover -1- toward the front.

-- Release the retaining tabs -2- on the bracket -4-.

-- Remove the Front Peripheral Camera -R243- -3- forward out of the bracket -4-.

-- Remove the bolts -8-.

-- Unclip the bracket -4- from the front bumper cover.