Blind Spot Detection Control Module -J1086- / -J1087-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the retaining tab -5- from the bracket -2-.
-- Remove the Blind Spot Detection Control Module 2 -J1087- -1- in -direction of the arrow- out of the bracket -2- until the connector -3- is accessible.
-- Release and disconnect the connector -3-.
-- Remove the nuts -4- for the bracket -2-
-- Remove the bracket -2- from the body.