Overview - Assembly Mounts

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Subframe Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pendulum Support
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- 60 Nm +90°
- Replace after removing
Bolt
- 50 Nm +90°
- Replace after removing
Bolt
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
- Replace after removing
Transmission Mount
- With support arm
- Removing and Installing. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Engine Support
- Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Engine Mount
- With support arm
- Removing and Installing. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .
Bolt
- Replace after removing
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .

Transmission with Threaded Insert (for Example Heli Coil) for Attaching the Pendulum Support

Fig 2: Identifying First Thread

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.

Identifying feature: there is a collar on the first thread -arrow-.

Make sure to use the appropriate bolts and observe the tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT (2.0L) or OVERVIEW - ASSEMBLY MOUNTS (3.6L) .