Engine, Supporting In Installation Position

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Support Bridge: 10-222A
Engine Support Bridge Adapter 35: 10-222A/35
Engine Support - Bracket w/Spindle and Hook: 10-222A/10
Engine/Gearbox Support Shackle (2 pc.): 10-222A/12

Support the Engine

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Unlock the retaining tab in direction of -arrow-, remove the left engine cover mount -1-.

Fig 1: Identifying Engine Cover Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the right mount -1- for the engine cover from the bracket -2-.

Fig 2: Identifying Engine Cover Mount And Locating Bore

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure the : 10-222A/12 as shown below, on the right lifting eye.

Position the : 10-222A as Shown.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Square Pipe from the : 10-222A
: 10-222A/35
Spindles from the : 10-222A
: 10-222A/12