Overview - Assembly Mounts

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Subframe Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pendulum Support
- Removing and installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
Bolt
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
Bolt
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
Bolt
- Tightening specification and sequence. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
Bolt
- 60 Nm + 90°
- Always replace
Bolt
- 50 Nm + 90°
- Always replace
Transmission Mount
- With support arm
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Engine Support
Bolt
- 50 Nm + 90°
- Always replace
Engine Mount
- With support arm
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
Bolt
- 40 Nm + 90°
- Always replace
Bolt
- 20 Nm + 90°
- Always replace
Bolt
- 60 Nm + 90°
- Always replace
Bolt
- 40 Nm + 90°
- Always replace