Measurement Preparations, Axle Alignment Without Driver Assistance Systems
WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Wheel Alignment Computer: VAG1813F or VW/Audi approved wheel alignment devices
- Brake Pedal Actuator: VAG1869/2 .
- Insert Tool - 18mm: T10179
- Shock Absorber Set: T10001
The Lateral Run-Out of the Wheel Must Be Balanced (Compensated For). Otherwise, the Measurement Result Will Be False.
A Correct Toe-In Adjustment Will Not Be Possible without Performing Lateral Run-Out Compensation!
Follow the operating instructions provided by the manufacturer of the alignment equipment.
-- Carry out wheel run-out compensation.
-- Install the : VAG1869/2 .
-- Actuate the brake pedal using brake pedal actuator.
Preparation Work for Calibrating Driver Assistance Systems