Axle Alignment Specified Values: Atlas

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Specified values valid for all engine versions.

Front Axle

Basic

Raised

PR Numbers

G01

G02

Total toe (wheels not pressed)

10' ± 10'

Camber (wheels in straight-ahead position). Refer to ⁽¹⁾.

-30' ± 30'

-21' ± 30'

Maximum permissible difference between both sides

maximum 30'

Toe differential angle at 20° steering angle. Refer to ⁽²⁾.

1° 15' ± 20'

Caster

7° 22' ± 30'

7° 14' ± 30'

Maximum permissible difference between both sides

maximum 30'

Height. Refer to ⁽³⁾.

467 ± 10 mm

477 ± 10 mm

⁽¹⁾	Camber corrections are not possible. It can only be slightly corrected by pushing the subframe.

⁽²⁾	The toe angle difference can also be indicated negatively in alignment computer, depending on manufacturer.

⁽³⁾	Height, Measuring. Refer to Height, Measuring .

Specified values valid for all engine versions.

Rear axle

Basic

Raised

PR numbers

G01

G02

Camber

-1°20' ± 30'

Maximum permissible difference between both sides

maximum 30'

Total toe

+10' ± 10'

Maximum permissible deviation from the driving axle

maximum 12'

Height. Refer to ⁽¹⁾.

495 ± 10 mm

497 ± 10 mm

⁽¹⁾	Height, Measuring. Refer to Height, Measuring .