Calibration Unit: VAS 6350A, INSTALLING AND ALIGNING: Notes
WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- If the vehicle is configured with PR + KA1 the rearview camera system does not have to be calibrated after removing and installing the Rearview Camera -R189-, because the calibration of the rearview camera system automatically takes place.
- If the vehicle is configured with PR + KA2 the rearview camera system must be calibrated after removing and installing the Rearview Camera -R189-.
After performing repair work on the vehicle, it may be necessary to re-calibrate the rearview camera system. In detail, this is the case after:
- Removing and installing the rear lid handle button with Rearview Camera -R189-
- After repair work performed on rear lid following an accident
- After an axle alignment
- After performing a repair at front or rear axle