Control Module for Emergency Call Module and Communication Unit -J949-, REPLACING

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

Control Module for Emergency Call Module and Communication Unit -J949-, Replacing and Adapting

Current data for the "Guided Fault Finding"

-- Select the Replace control module function on the in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Remove the Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Install the new Control Module for Emergency Call Module and Communication Unit -J949-. Refer to Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING .

-- Select the Coding function on the in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Adapting to Immobilizer function on the in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- Select the Activating function on the in the Guided Fault Finding or Guided Functions mode for the Control Module for Emergency Call Module and Communication Unit -J949-.

-- In the Guided Fault Finding or Guided Functions select the function "ERA-Glonass, Operating" using the.

-- Switch off the ignition.