Infotainment System Display, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
-- Remove the instrument panel center trim. Refer to RADIO/NAVIGATION SYSTEM FRAME, REMOVING AND INSTALLING .
-- Insert the Radio Removal Tool: T10057 in the release slots -2- of the Front Information Display Control Head -J685- -1-.
- The points at the grip eyelets of the Radio Removal Tool: T10057 must face outward.
-- Release the upper locking mechanisms -2- by pushing in the direction of travel.
-- Release the lower locking mechanisms -2- by pushing in the direction of travel.
-- Remove the Front Information Display Control Head -J685- -1-.
-- Release and disconnect the connectors.