LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2020 >> Atlas SE R-Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Ignition/Glow Plug System (2.0L)) >> 28 Ignition/Glow Plug System >> Ignition System >> Knock Sensor 1 -G61-, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Knock Sensor 1 -G61-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -2- from Knock Sensor 1 -G61-.

Fig 1: Locating Connectors
GWWA24-11095Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Engine Temperature Control Actuator -N493-. Refer to Engine Temperature Control Actuator -N493-, REMOVING AND INSTALLING .

NOTE:

The Knock Sensor 1 -G61- is located below the intake manifold behind the coolant pump.

-- Remove the Knock Sensor 1 -G61- -arrow-.

Fig 2: Locating Knock Sensor Bolt
GWWA28-10028Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.