Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Atlas Cross Sport, 2022 Volkswagen Atlas Cross Sport, 2021 Volkswagen Atlas Cross Sport, and 2020 Volkswagen Atlas Cross Sport. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Disconnect the coolant hose -1- from the charge air pipe and push upward.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vehicles with Coolant Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -2-.

-- Remove the nuts -arrows- and push the coolant valve -1- to the side.

All Vehicles

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -1- from the Engine Speed Sensor -G28-.

-- Remove the bolt -arrow- and the Engine Speed Sensor -G28-.