Peripheral Camera Control Module - J928-, Removing and Installing: Removing

Raise the front seat into its highest position and then move it all the way back.
Turn off the ignition and all electrical equipment.
Move the ignition key outside of the vehicle to prevent switching on the ignition unintentionally.
Slide the module carrier -2- with the Peripheral Camera Control Module - J928- -1- outward and lift slightly at the center tunnel in direction of -arrow A-.
Tilt the module carrier -2- with the Peripheral Camera Control Module - J928- -1- out of the outer mount in the direction of -arrow B-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Rotate the module carrier -2- with the Peripheral Camera Control Module - J928-
Unlock and disconnect the connectors from the Peripheral Camera Control Module - J928-
Remove the Peripheral Camera Control Module - J928- -1- from the module carrier -2- -arrow-.