Undamaged Window Glass, Preparing For Installation

Adhesive Bead, Cutting

• When reusing an undamaged window, cut the remaining adhesive sealant back to 1 to 2 mm shortly before rebonding.
• Do not damage the primer and ceramic coating at the same time.

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Keep the adhesive surface free of dirt and grease.
• Do not apply activator, glass/paint primer or cleaning solution on the fresh cut adhesive surface.
• The remaining material acts as a base for the new adhesive sealant to be applied.

• Exception: If the bonding is going to be performed longer than one day after cutting back the adhesive bead, then the remaining material must be activated with the Activator.

-- Apply the activator evenly in a single stroke using the Applicator.

Drying time is approximately 10 minutes