Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Audi A8 Quattro and 2013 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace any bolts that were tightened with an additional turn.

When installing, bring all cable ties back to same positions.

-- Install the subframe, refer to Subframe .

WARNING:

Risk of accident due to loose connections.

If the bolts in the subframe are not tightened to final torque, vehicle must not be driven.

-- Install the A/C compressor, refer to Air Conditioning (A/C) Compressor .

-- Install the engine oil cooler, refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Install the generator, refer to Generator .

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING, RIBBED BELT FOR AUXILIARY COMPONENTS .

-- Install the lock carrier cover, refer to Front Bumper .