Engine, Securing On Engine And Transmission Holder: Procedure

• Engine/transmission assembly removed and separated on Scissor Lift Table VAS 6131B, refer to ENGINE AND TRANSMISSION, SEPARATING .
• Engine secured with Articulated Joint Support VAS 6131/13-7.

-- Attach the Lift Arm Extension VAS 6101 to the Shop Crane VAS 6100.

Fig 1: Identifying Engine Assembly Lift Tools

Courtesy of AUDI OF AMERICA, LLC

-- Engage the Lifting Tackle 3033 on the engine lifting eyes and on the shop crane as shown.

-- Tension engine slightly with shop crane, do not raise.

-- Version 2 of electrohydraulic engine mount solenoid valves only: Disconnect the left and right connector -3- from the Left/Right Electrohydraulic Engine Mount Solenoid Valve Left Electrohydraulic Engine Mount Solenoid Valve -N144- / Right Electrohydraulic Engine Mount Solenoid Valve -N145-.

Fig 2: Installed Location For Electrohydraulic Engine Mount Solenoid Valve

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left and right bolt -2- from the engine mount.

Fig 3: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Articulated Joint Support VAS 6131/13-7 from the engine.

Fig 4: Identifying Articulated Joint Support VAS 6131/13-7

Courtesy of AUDI OF AMERICA, LLC

-- Raise engine from engine carrier.

-- Free up the wires.

Fig 5: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the left engine support.

-- Remove the bolts -arrows- and the right engine support.

Fig 6: Removing Nut And Freeing Up Ground Wire

Courtesy of AUDI OF AMERICA, LLC

-- Secure the starter on the engine.

-- Secure the engine to the Engine And Transmission Holder VAS 6095 using the Engine/Transmission Holder - Universal Mounting VAS 6095/1 and Engine/Transmission Holder - V6 TDI Bracket VAS 6095/1-11 and tighten to 40 Nm, as shown.

Fig 7: Identifying Engine Stand Assembly

Courtesy of AUDI OF AMERICA, LLC