4. Display in Instrument Cluster, Checking
WARNING: This page is about a different car, the 2021 Audi e-tron Quattro and 2019 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Test step 4.1
- Drive ready mode is active, drive position in "P", foot brake not pressed.
-- Move the shifter in the direction of "D" or "R" :
The following message must appear in the instrument cluster: "Press brake pedal to select a gear".
Test step 4.2
- Drive ready mode is active, drive position in "N", vehicle is stationary.
-- End drive ready mode and open the driver door:
Drive position "N" must remain engaged.
The following message must be shown in the instrument cluster: "Before leaving engage P, otherwise the vehicle can roll". The warning tone must also sound.