Overview - Fender: Notes
WARNING: This page is about a different car, the 2016 Volkswagen e-Golf and 2015 Volkswagen e-Golf. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The illustration shows the left side. The right side is identical.
- Fender
- Removing and Installing. Refer to FENDER, REMOVING AND INSTALLING .
- Bolt
- 6.0 Nm
- Quantity: 2, A-pillar
- Bolt
- 6.0 Nm
- Quantity: 2, side sill
- A-Pillar Damper
- Inserted between the fender and A-pillar.NOTE:
Installed on vehicles through 02/2016.
On vehicles from 03/2016 the damper is replaced by a end panel.
- Inserted between the fender and A-pillar.
- Fender Damper
- Inserted between the fender and the upper wheel housing longitudinal member.
- Hex Nut
- 2.0 Nm
- Quantity: 2
- Guide
- Removing:
- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Remove the hex nut -6-.
- There are different versions. Refer to the Parts information for the allocation.
- Double Bolt
- 6.0 Nm
- Fender brace, quantity: 2
- Fender Brace
- Removing and Installing. Refer to FENDER BRACE, REMOVING AND INSTALLING .
- Bolt
- 6.0 Nm
- Fender connecting piece, quantity: 3
- Deformation Element
- Front and rear. Refer to Overview - Deformation Element .