Engine Control Module -J623-, REMOVING AND INSTALLING, WITHOUT PROTECTIVE HOUSING: Removing
WARNING: This page is about a different car, the 2016 Volkswagen e-Golf and 2015 Volkswagen e-Golf. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch on the ignition and select the following menu items on the Vehicle Diagnostic Tester:
- 01 - Motor electronics
- Guided Functions
- 01 - Replacing the Engine Control Module
-- Turn off the ignition and remove the ignition key.
-- Disconnect the battery before taking the engine control module out of its holder. Refer to Battery, Disconnecting and Connecting .
-- Release the Engine Control Module -J623- in the direction of the -arrow A-.
-- Pivot out the Engine Control Module -J623- in the direction of the -arrow B- and remove it from the bracket.
-- Release and remove the connectors for the Engine Control Module -J623-.