SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

On << Main Menu >> display, select {Each System Check}.
On << System Selection Menu >> display, select {Engine Control System}.
Click the [OK] button after the information of engine type has been displayed.
On << Engine Diagnosis >> display, select {Clear Memory}.
When the "Clear Memory?" is shown on the screen, click the [YES] button.
When "Done" and "Turn off the ignition switch." are shown on the display screen, turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to application help for Subaru Select Monitor.