Connection Diagram - EVAP System
- Engine
- EVAP Canister Purge Regulator Valve 1 -N80-
- Checking. Refer to Vehicle Diagnostic Tester.
- Bleeder Line
- From the EVAP canister to engine
- Cap
- Seal must not be dirty or damaged
- Air Filter
- Only for vehicles with fuel tank leak detection
- Leak Detection Pump
- Only for vehicles with fuel tank leak detection
- Removing and Installing. Refer to LEAK DETECTION PUMP, REMOVING AND INSTALLING .
- EVAP Canister
- Component location: under the wheel housing liner in the right rear wheel housing
- Removing and Installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Fuel Tank
- Overview. Refer to OVERVIEW - FUEL TANK .
- Removing and Installing. Refer to FUEL TANK, REMOVING AND INSTALLING .