Engine Control Module -J623-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Passat, 2017 Volkswagen Passat, and 2016 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch off the ignition.

-- Remove the E-box cover inside the engine compartment -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unlock and disconnect the connector from the engine control module.

-- Push the tabs on the side guides -3- carefully toward the outside with a screwdriver -2- in direction of -arrow-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the engine control module -1- from the guides -3-.