LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2019 >> Passat SE R-Line, Eng CD DDSA >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Fuel Preparation And Injection System (Service Information - CDVB)) >> 24 Fuel Preparation And Injection >> Engine Control Module >> Engine Control Module -J623- WITH PROTECTIVE HOUSING, REMOVING AND INSTALLING >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module -J623- WITH PROTECTIVE HOUSING, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2018 Volkswagen Passat, 2017 Volkswagen Passat, and 2016 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

NOTE:

If it is necessary to replace the engine control module, connect the Vehicle Diagnostic Tester and perform "Replace control module".

Shear bolts attach the protective housing. It is not possible to remove the shear bolts without damaging them. Use :VAS6682  or a cutting grinder to remove the shear bolts. Replace the protective housing if it gets damaged.

scientia non olet · About LEMON Manuals