Engine Control Module -J623- WITH PROTECTIVE HOUSING, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2018 Volkswagen Passat, 2017 Volkswagen Passat, and 2016 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the engine control module -1- into the guides -3- until it locks.

-- If the control module was replaced, then attach the bracket -4- to the engine control module with shear bolts -6-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the shear bolts -6- just enough until the bolt head breaks off.

-- Connect the connectors -1 and 3- to the engine control module.

-- Install the locking mechanism -5- with shear bolts -2-.

-- Tighten the shear bolts -2- until the bolt heads break off.

-- Install the E-box cover -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .