Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2021 Volkswagen Tiguan, 2020 Volkswagen Tiguan, 2019 Volkswagen Tiguan, and 2018 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment.
-- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
-- Remove the driver side storage compartment. Refer to DRIVER SIDE STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -3-.
-- Push the Control Module for Emergency Call Module and Communication Unit -J949- -1- upward and remove toward the rear out of the bracket -2-.
-- Remove the nuts -arrows-.
-- Remove the bracket -2- from the bracket for the Vehicle Electrical System Control Module -J519-.