Transmission, Disassembling And Assembling: Notes

Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts, Differential and Gearshift Rods, Removing and installing. 

Special tools and workshop equipment required 

• Holding Plate: VW309A 
• or Holding Plate: VW309A 
• Holding Fixture: VW313 
• Transmission Support: VW353 
• Press Piece - Multiple Use: VW455  or Press Piece - Front Wishbone: 3160 
• Slide Hammer Set: VW771 
• -1- Internal Puller: VAS251603  (Kukko 21-01)
• -3- Splitter: VAS251407  (Kukko 17-0)
• -4- Counter Support: VAS251621  (Kukko 22-1)
• Bracket - Multiple Use: 30-211A 
• Seal Installer - Drive Flange: T10143  or Seal Installer - Output Shaft Oil Seal: T10180 
• Locking Sleeve Drift: T10169 
• or Locking Sleeve Drift: T10362  . Refer to Figure.
• Seal Installer - Driveshaft: T40008 
• Torque Wrench, 6-50Nm: VAG1331A 
• Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A 
• Pry Lever: 80-200 
• Shop Crane - Drip Tray: VAS6208 
• Sealing Compound. Refer to the Parts Information.