Gearshift Cable And Selector Cable, Removing And Installing: Removing

-- Remove the gearshift mechanism. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .

-- Bend open the tabs -arrows- on the base plate with a screwdriver. (Only the tabs on the left side of the base plate are shown in the illustration).

Fig 1: Bend The Tabs

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the base plate.

-- Remove the lock washers -2 and 3-.

Fig 2: Identifying Shift Lever And Selector Cable

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the shift cable -1- and selector cable -4- from the gearshift lever and selector lever, for example, using the : T10236  or a screwdriver.

-- Remove the shift cable and selector cable from the shift housing.

Release the retainer -A- for the cable -B- as follows:

Fig 3: Identifying Sequence To Release Retainers -A- For Shift And Selector Cables -B-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

• Push the sleeve forward as far as it will go in direction of -arrow 1-.
• Turn the sleeve to the right as far as it will go in direction of -arrow 2- until it engages.

-- Remove the retainer.

-- Remove the lock washers -1 and 2-.

Fig 4: Identifying Lock Washers

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cable bracket from the cables.