Common Specs & Procedures
SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | WORKING WITH A/C SERVICE STATION (1 Of 2) / WORKING WITH A/C SERVICE STATION (2 Of 2) | ||
| Torque | Refer to the appropriate procedure OVERVIEW - A/C COMPRESSOR POWER UNIT | ||
| Axle Nut/Hub Nut/Wheel Bearing Unit Bolt | |||
| Front | 200 Nm + 180° | ||
| Rear | Refer to the appropriate procedure OVERVIEW - WHEEL BEARING | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding Sequence | HYDRAULIC SYSTEM | ||
| Disc Brakes | FRONT BRAKES | ||
| Torque | Refer to the appropriate procedures, HYDRAULIC SYSTEM / FRONT BRAKES / REAR BRAKES | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | Refer to the appropriate procedure OVERVIEW - GENERATOR | ||
| Drive Belts | |||
| Adjustment | RIBBED BELT, REMOVING AND INSTALLING | ||
| Belt Routing | OVERVIEW - CYLINDER BLOCK, BELT PULLEY SIDE | ||
| Engine Cooling | |||
| General Service Specifications | Refer to the appropriate FLUID CAPACITY TABLES information. | ||
| Radiator Cap Pressure | The pressure release valve must open at 1.6 to 1.8 bar (23.2 to 26.1 psi). Pressure Relief Valve in Cap, Checking | ||
| Thermostat R & I | N/A | ||
| Water Pump R & I | Refer to the appropriate procedure COOLANT PUMP/THERMOSTAT | ||
| Engine Mechanical | |||
| Compression | COMPRESSION, CHECKING | ||
| Oil Pressure | |||
| idle | 0.85 to 1.6 bar (12.3 to 23.2 psi) | ||
| 2000 RPM | 1.2 to 1.6 bar (17.4 to 23.2 psi) | ||
| 3700 RPM | 1.2 to 1.6 bar (17.4 to 23.2 psi) | ||
| Overhaul | ENGINE ASSEMBLY [CJXC, CJXB, CYFB, CJXD, CJXG, DJHA, DJHB, DJJA, DLRA, DNUC, DNUE] / CYLINDER HEAD, VALVETRAIN [CJXC, CJXB, CYFB, CJXD, CJXG, DJHA, DJHB, DJJA, DLRA, DNUC, DNUE] / CRANKSHAFT, CYLINDER BLOCK [CJXC, CJXB, CYFB, CJXD, CJXG, DJHA, DJHB, DJJA, DLRA, DNUC, DNUE] | ||
| Torque | Refer to the appropriate procedures ENGINE ASSEMBLY [CJXC, CJXB, CYFB, CJXD, CJXG, DJHA, DJHB, DJJA, DLRA, DNUC, DNUE] / CYLINDER HEAD, VALVETRAIN [CJXC, CJXB, CYFB, CJXD, CJXG, DJHA, DJHB, DJJA, DLRA, DNUC, DNUE] / CRANKSHAFT, CYLINDER BLOCK [CJXC, CJXB, CYFB, CJXD, CJXG, DJHA, DJHB, DJJA, DLRA, DNUC, DNUE] | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. | ||
| Engine Oil Drain Plug | 30Nm | ||
| Flywheel/Flex Plate Torque | 60 Nm +90° | ||
| Fuel System | |||
| Fuel Pressure Test Procedure | FUEL PRESSURE, CHECKING | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug | 06K 905 601 L | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | Refer to the approriate procedure OVERVIEW - STARTER | ||
| Wheel Alignment | |||
| Adjustment Specifications | AXLE ALIGNMENT | ||
| Torque | N/A | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 120 Nm | ||