LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2019 >> Golf R Standard Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> 45 Antilock Brake System >> Control Module And Hydraulic Unit >> ABS Control Module -J104- /ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING >> Control Module And Hydraulic Unit, Removing And Installing, AWD Diesel Engine >> Brake Line Tightening Sequence: (AWD DIESEL ENGINE)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Line Tightening Sequence: (AWD DIESEL ENGINE)

Fig 1: Brake Lines, Attaching To Hydraulic Unit Sequence
GWWN45-10263Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Brake Pedal Actuator:VAG1869/2  .

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, STANDARD BLEEDING .

-- Code The Radio.

-- Code the ABS Control Module -J104-. Refer to Vehicle Diagnostic Tester.

While doing so, a basic setting for the Steering Angle Sensor -G85-, Transverse Acceleration Sensor -G200-, Longitudinal Acceleration Sensor -G251- and Brake Pressure Sensor 1 -G201- must be performed.