MECHATRONIC, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
- Replace the O-ring -arrow- on the Dual-Clutch Transmission Mechatronic -J743- connector.
- Replace the bolts for the Dual-Clutch Transmission Mechatronic -J743-.
- If the Dual-Clutch Transmission Mechatronic -J743- is being replaced, the O-ring is included in the replacement part delivery package.
-- Carefully place the Mechatronic -1- in the transmission.
-- Tighten the bolts -arrows- for the Dual-Clutch Transmission Mechatronic -J743-. Refer to Figure.
-- Install the transmission fluid pan. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .
-- Fill transmission oil and check oil level. Refer to TRANSMISSION FLUID .
-- Perform a basic setting for the Mechatronic:
-- Connect the Vehicle Diagnostic Tester and start Guided Functions .
- 02 Transmission Electronics
- 02- Basic Setting