April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Tools

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Special Tools -- Transmission Housing Servicing (Transmission As Of Approx. 04.2003) (1 Of 3)

GWWW34-10005

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Bearing Driver - Multiple Use: VW244B
Transmission Support: VW353
Press Plate: VW401
Press Plate: VW402
Press Piece - Rod: VW407
Press Piece - 37mm: VW416B

Fig 2: Identifying Special Tools -- Transmission Housing Servicing (Transmission As Of Approx. 04.2003) (2 Of 3)

GWWW34-10006

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Guide Pin: VW436A
Press Piece - Guide Pin: VW439
Slide Hammer Set: VW771
Crankshaft Holding Fixture: VW801
Guide Pin: 10-15
Press Piece - Pivot Mount Bushing: 3124

Fig 3: Identifying Special Tools -- Transmission Housing, Servicing (3 Of 3)

GWWW34-10028

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Bearing Installer - Crankshaft Pilot Bearing: 3264
Subframe Support Tool: 3290
Torque Wrench 1331 5-50Nm: VAG1331
Bushing Driver - Selector Shaft: T10168
Locking Sleeve Drift: T10169 or Locking Sleeve Drift: T10362 . Refer to Figure
Breather Tube Tool: T10203

Fig 4: Identifying Special Tools -- Transmission Housing, Shift Mechanism, Input Shaft, Output Shafts (Pinion Shafts), Differential And Selector Rods

GWWW34-10040

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Holding Plate: VW309A
Holding Fixture: VW313
Transmission Support: VW353
Press Piece - Multiple Use: VW455 or Press Piece - Front Wishbone: 3160
Slide Hammer Set: VW771
-1- Puller - Kukko Internal - 12-16mm: 21/01
-3- Puller - Kukko Quick Action Separating Tool - 5-60mm: 17/0
-4- Puller - Kukko Counterstay: 22/1

Fig 5: Identifying Special Tools -- Clutch Housing, Servicing

GWWW34-10042

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Press Piece - Rod: VW407
Bushing Driver - Selector Shaft: T10168
Seal Installer - Drive Axle: T40008
-1- Puller - Kukko Internal - 14-19mm: 21/2
-1- Puller - Kukko Internal - 20-30mm: 21/4
-4- Puller - Kukko Counterstay: 22/1
-4- Puller - Kukko Counterstay: 22/2

Fig 6: Identifying Special Tools -- Transmission

GWWW34-10120

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Bracket - Multiple Use: 30-211A
Seal Installer - Drive Flange: T10143 or Seal Installer - Output Shaft Oil Seal: T10180
Locking Sleeve Drift: T10169
or Locking Sleeve Drift: T10362 . Refer to Figure
Seal Installer - Drive Axle: T40008
Torque Wrench 1331 5-50Nm: VAG1331
Hot Air Blower: VAG1416
Pry Lever: 80-200

Fig 7: Identifying Special Tools

GWWW34-10219

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Window Release Tool: T10236
Press Piece - Multiple Use: VW412
Over-Center Spring Assembly Tool: T10178
Engine Support Bridge - Engine Support 25: 10-222A/25
2 = Counter-Support for example, from : Kukko model line 16
Wedge: T10357

Special tools and workshop equipment required

Connecting Pin: T10027A

Fig 8: Identifying Connecting Pin T10027 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Press Piece - Block: T10083

Fig 9: Identifying Pressing Support T10083
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Socket And Extended Bit: T10107

Fig 10: Identifying Multi-Point Socket T10107 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Gearbox Support: T10108

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Wedge Set: T10383

Fig 11: Identifying Wedge T10383
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Puller - Crankshaft/Power Steering Seal: T20143/1

Fig 12: Extractor Hook T20143
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Engine Support Brackets: T40093/3-6 (quantity 2)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Hose Clip Pliers: VAG1275A

Fig 13: Hose Clamp Pliers VAG 1275
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Torque Wrench 1332 40-200Nm: VAG1332

Fig 14: Identifying Torque Wrench 1332
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Shop Crane: VAS6100

Fig 15: Identifying Shop Crane VAS 6100
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Engine Bung Set: VAS6122

Fig 16: Engine Bung Set
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Shop Crane - Drip Tray: VAS6208

Fig 17: Drip Tray For Shop Crane VAS 6208
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Holding Plate: VW309A

Fig 18: Holding Plate VW 309
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Transmission Support: VW353

Fig 19: Identifying Transmission Support VW 353
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Press Piece - Shift Rod/Alternator: VW423

Fig 20: Identifying Sleeve VW 423
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Hose Clamps - Up To 25mm: 3094

Fig 21: Hose Clamps
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Rear Wheel Bearing Kit - Piece 5: 3253/5

Fig 22: Assembly Tool 3253
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
For oil filler plug with multi-point fitting Triple Square Socket Driver: 3357 .

Fig 23: 3357 Triple Square Socket Driver
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
or the equivalent equipment, Backrest Panel Tool: 3370

Fig 24: Backrest Panel Tool 3370
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Sealing Grease. Refer to the Parts Information.
Holding Fixture: VW313