Brake Line Tightening Sequence: (RHD)

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Pre-tighten the brake lines in the sequence -1- to -6-.

-- Tighten the brake lines in the sequence -1- to -6-.

-- Remove the Brake Pedal Actuator:VAG1869/2  .

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, STANDARD BLEEDING .

-- Code The Radio.

-- Code the ABS Control Module -J104- using the Vehicle Diagnostic Tester.

While doing so, a basic setting for the Steering Angle Sensor -G85-, Transverse Acceleration Sensor -G200-, Longitudinal Acceleration Sensor -G251- and Brake Pressure Sensor 1 -G201- must be performed.