Overview - Assembly Mounts: Notes
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- Engine Support
- Refer to OVERVIEW - SUBFRAME MOUNT .
- Engine Mount
- Refer to OVERVIEW - SUBFRAME MOUNT .
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- Pendulum Support
- Bolt
- Tightening Specification. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
- For pendulum support to subframe
- Bolt
- Tightening Specification. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Always replace
- For pendulum support to transmission
- Transmission with threaded insert. Refer to Fig 2
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- For pendulum support to transmission
- Transmission with threaded insert. Refer to Fig 2
- Bolt
- 60 Nm +90°
- Replace after removing
- Tightening sequence. Refer to Install the Left Transmission Mount as Follows: .
- For transmission mount to transmission bracket
- Bolt
- 60 Nm +90°
- Replace after removing
- Tightening sequence. Refer to Install the Left Transmission Mount as Follows: .
- For transmission mount to transmission bracket
- Quantity: 2
- Transmission Mount
- Check the adjustment. Refer to SUBFRAME MOUNT, CHECKING ADJUSTMENT
- Adjusting. Refer to SUBFRAME MOUNT, ADJUSTING
- Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Always replace
- Transmission mount to chassis
- Bolt
- 40 Nm +90°
- Replace after removing
- Tightening sequence. Refer to Install the Left Transmission Mount as Follows: .
- For transmission bracket to transmission
- Transmission Bracket
- Illustration does not correspond to version in vehicle
- Bolt
- 40 Nm +90°
- Replace after removing
- For transmission bracket to transmission
- Tightening sequence. Refer to Install the Left Transmission Mount as Follows: .
Transmission with Threaded Insert (for Example Heli Coil) for Attaching the Pendulum Support
NOTE:
There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.
Identifying feature: there is a collar on the first thread -arrow-.
Make sure to use the appropriate bolts and observe the tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .