4.1 Driver Assistance Systems Front Camera, Removing And Installing
Removing
- Turn off the ignition and all electrical equipment.
- Move the ignition key outside of the vehicle to prevent the ignition from switching on unintentionally.
- Remove the mirror base cover. Refer to Body Interior (Interior Rearview Mirror; Overview - Interior Rearview Mirror).
- Unclip the Driver Assistance Systems Front Camera - R242- -2- in the direction of -arrow A- from the clamps -1-.
- Remove the Driver Assistance Systems Front Camera - R242- -2- in the direction of -arrow B- from the holder.
- Release and disconnect the connector -3-.
Installing
Install in reverse order of removal and note the following:
- Calibrate the Driver Assistance Systems Front Camera - R242-. Refer to Suspension, Wheels, Steering (Driver Assistance Systems Front Camera; Driver Assistance Systems Front Camera, Calibrating).