Radiator, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal and note the following:
-- If there are small impressions on the fins, pay attention to the following. Refer to RADIATOR AND CONDENSER ASSEMBLY .
-- Place the radiator at an angle in the lower charge air cooler mount and engage the radiators with each other -arrow-. Pull to check that the catch is secure.
-- Fill with coolant. Refer to Prepare the Cooling System for Filling: .
Tightening Specifications:
- Refer to OVERVIEW - RADIATOR/RADIATOR FAN