Special Tools

Fig 1: Identifying Special Tools Required

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Puller - Ball Joint:T10187
Torque Wrench 1331 5-50Nm:VAG1331
Torque Wrench 1332 40-200Nm:VAG1332
Engine and Gearbox Jack:VAS6931 or Engine and Gearbox Jack:VAG1383A

Fig 2: Identifying Hose Clamp Pliers V.A.G And Special Tools

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Hose Clip Pliers:VAG1275A
Torque Wrench 1332 40-200Nm:VAG1332
Open Ring Wrench - 24mm:VAG1332/11
Locking Pliers:VAS6199

Fig 3: Identifying Special Tools -- Tie Rod, Removal And Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Torque Wrench 1332 40-200Nm:VAG1332
Torque Wrench Insert - Open Jaw :VAG1923
Puller - Ball Joint:T10187
Locking Pliers:VAS6199

Special tools and workshop equipment required

Torque Wrench 1783 - 2-10Nm:VAG1783

Fig 4: Identifying Torque Wrench
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

DRUCK NUMBER: K0059320621

Factory Edition	Edit Edition	Job Type	Feedback	Notes	Quality Checked By
07.2020	09/24/2020	Local Feedback	1471347	Added lower another 20 mm to the Lower Rear Axle, AWD procedure.	Eric P.
07.2020	09/22/2020	Factory Update	N/A		Eric P.
06.2020	07/23/2020	Factory Update	N/A		Eric P.
08.2019	04/22/2020	Local Update		Basic edits	Tom Perry
08.2019	10/03/2019	Factory Update Local Feedback	N/A 1465449	Changed external link 26.1.1 to 26.2.1 for all links to "Exhaust system to subframe"	Eric P. Tom Perry
01.2019	04/16/2019	Local Feedback	1426812	Remove Mandatory Replacement Parts	Tom Perry
01.2019	04/09/2019	Local Factory Feedback	1419982	"Secure the -VAS6931--2- on the wheel hub using a wheel bolt" ; tool number corrected to T10149	Tom Perry
01.2019	02/25/2019	Factory Update	1408101	Clarification of driveshaft disconnect rather than removal in Lower Control Arm, Removing and Installing chapter	Tom Perry
12.2018	01/15/2019	Factory Update	1400623	Wheel bearing torque correction	Tom Perry
09.2018	10/16/2018	Factory Update	N/A		Eric P.
06.2018	07/02/2018	Factory Update	N/A		Eric P.
11.2017	03/22/2018	Local Factory Feedback	1318110	Changed torque values for the front coupling rod nuts.	Tom Perry
11.2017	12/07/2017	Factory Update	1287964	Updated the Lower control arm bonded rubber bushing, replacing procedure	Eric P.
07.2017	07/25/2017	Factory Update	1271817	Rear Subframe Securing procedure changes	Tom Perry
05.2017	06/16/2017	Local Feedback	1262000	Changed torque values for the front coupling rod nuts.	Eric P.
05.2017	06/07/2017	Factory Update	N/A		Eric P.
03.2017	03/22/2017	Factory New	N/A		Eric P.