Overview - SUBFRAME Mount

Fig 1: Exploded View Of Subframe Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pendulum Support
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Bolt
- 60 Nm +90°
- Always replace after removing
Bolt
- 50 Nm +90°
- Always replace after removing
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Transmission Mount
- With support arm
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
Engine Support
- Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Engine Mount
- With support arm
- Removing and installing. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing
Bolt
- Tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .
- Always replace after removing

Transmission With Threaded Insert (for Example Heli Coil) for Attaching the Pendulum Support.

Fig 2: Identifying First Thread

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.

Identifying feature: there is a collar on the first thread -arrow-.

Make sure to use the appropriate bolts and observe the tightening specification. Refer to OVERVIEW - ASSEMBLY MOUNTS [CDVC] or OVERVIEW - SUBFRAME MOUNT [DCGA, CXDA] .