11.3 Front Sensor, Removing And Installing

Removing

Loosen the front section of the wheel housing liner, do not remove the wheel housing liner completely. Refer to Body Exterior (Wheel Housing Liner; Front Wheel Housing Liner, Removing and Installing).
Press both catches in the direction of -arrow A- and press the sensor -1- inward from outside.
Release and disconnect the connector -2-.

Installing

Install in reverse order of removal and note the following:

NOTE:

When inserting sensor into sensor bracket, make sure that decoupling ring (black silicone ring) has proper fit on the sensor head.
Both sensor mount retaining clips must engage audibly when installing the sensor.