Removal And Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It is not necessary to remove the Audio Front Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode .

1.

NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Module Configuration .

2.

Remove the instrument panel center finish panel. For additional information, refer to Instrument Panel and Console .

3.

Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and the antenna cable connector.

4.

To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to PMI in Module Configuration .