3.2.1 Control Module for Adaptive Cruise Control, Removing And Installing, Version 1
NOTE:
If the Control Module for Adaptive Cruise Control - J428- is replaced, start the respective function using the Vehicle Diagnostic Tester.
Removing
- Remove the VW emblem from the radiator grille. Refer to Body Exterior (Name Badges and Emblems; Front Emblems, Removing and Installing).
- Release the tabs -2-.
- At the same time, pivot the Control Module for Adaptive Cruise Control - J428- -1- out of the radiator grille in the direction of -arrow-.
- Release and disconnect the connector -3-.
Installing
Install in reverse order of removal and note the following:
- The Control Module for Adaptive Cruise Control - J428- must engage audibly and securely in the radiator grille.
- If necessary, calibrate the adaptive cruise control (ACC). Refer to 3.3 Adaptive Cruise Control, Calibrating