Removal And Installation

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

1.

Remove the LH quarter trim panel. For additional information, refer to Interior Trim and Ornamentation .

2.

If replacing the parking aid speaker only, proceed as follows:
- Disconnect the parking aid speaker electrical connector.
- Disengage the parking aid speaker clips.
- Remove the parking aid speaker.

3.

If replacing the PAM, proceed as follows:
- Disconnect the electrical connectors.
- Remove the PAM bracket screw.
- Remove the PAM.

4.

To install, reverse the removal procedure.