Fastener Tightening Specifications
WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Actuator for intake manifold change-over to upper intake manifold | - | 2.5 |
| Ball pin to upper intake manifold | - | 2.5 |
| Bracket for throttle valve control module to upper intake manifold | - | 6 |
| Camshaft position sensor to housing | - | 9 |
| Fuel pressure sensor to fuel rail | - | 20 |
| High-pressure line to bracket | - | 9 |
| High pressure line protective plate to engine | - | 9 |
| High pressure line union nut | - | 27 |
| High pressure pump to housing | - | 20 |
| Intake manifold tuning valve position sensor to upper intake manifold | - | 2.5 |
| Low fuel pressure sensor | - | 15 |
| Oxygen sensor | - | 55 |
| Retaining bracket for fuel rail to lower intake manifold | ||
| - Bolt | - | 2.5 |
| - Nut | - | 9 |
| Threaded support | - | 40 |