Boot, Removing And Installing: Installing

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Replace the sealing rings -item ) OVERVIEW - POWER STEERING GEAR - List Item: Seal on the steering gear.

Before installing, the steering rack must be coated with the Steering Gear Grease: AOF 063 000 04 supplied in the repair kit.

CAUTION:

Never use any other grease.

For this purpose, turn steering to stop toward both sides in succession.

-- Grease the steering rack on the toothed side with the Steering Gear Grease: AOF 063 000 04 .

-- Turn steering wheel into straight ahead position.

-- Slide the boot onto the tie rod and the steering gear and secure with new clamps -arrows-.

Fig 1: Identifying Boot On Tie Rod And Clamps -Arrows-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the tie rod end. Refer to TIE ROD END, REMOVING AND INSTALLING .

-- Install the wheel and tighten. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .