LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2018 >> e-Golf SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 1833 (Mechanical Components (Brake System)) >> 46 Mechanical Components >> Brake Caliper Threaded Connection Thread, Servicing >> General Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Information

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

For vehicles with aluminum wheel bearing housing

NOTE:

All procedures are to be carried out by hand without additional tools when servicing the thread.

List of Individual Tools for the Brake Caliper Thread Repair Kit VAS 6627:

Fig 1: List of Individual Tools for the Brake Caliper Thread Repair Kit VAS 6627:
GWWN46-10317Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -  Drill template

2 -  Locating bolt M12x1.5

3 -  Locating bolt M14x1.5

4.1 -  Brass sleeve M12 (for special drill bit and seat miller)

4.2 -  Brass sleeve M12 (for thread tap)

5.1 -  Brass sleeve M14 (for special drill bit and seat miller)

5.2 -  Brass sleeve M14 (for thread tap)

6 -  Tensioning tool

7 -  Cutting oil container

List of Individual Tools for the Brake Caliper Thread Repair Kit - Set 8 -VAS 6627/8- for the Thread M12x1.5:

Fig 2: List of Individual Tools for the Brake Caliper Thread Repair Kit - Set 8 -VAS 6627/8- for the Thread M12x1.5:
GWWN46-10318Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Special drill bit
  2. Seat miller
  3. Tap M12x1.5
  4. Insertion tool M12x1.5
  5. Thread inserts M12x1.5

List of Individual Tools for the Brake Caliper Thread Repair Kit - Set 9 -VAS 6627/9- for the Thread M14x1.5:

Fig 3: List of Individual Tools for the Brake Caliper Thread Repair Kit - Set 8 -VAS 6627/8- for the Thread M12x1.5:
GWWN46-10318Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Special drill bit
  2. Seat miller
  3. Tap M14x1.5
  4. Insertion Tool M14x1.5
  5. Thread inserts M14x1.5