Selector Mechanism, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Install the two centering pins on the back of the selector mechanism into the opening on the base plate inside the center consoles.
NOTE:
The two centering pins are located at the front and back between the openings.
The centering pins align the selector mechanism and the handle with the center console.
-- Tighten the bolts -arrows-.
-- Connect the connector -1-.
-- Install the center console. Refer to Center Console, Removing and Installing .
-- Check the selector mechanism. Refer to GEARSHIFT MECHANISM, CHECKING .