Overview - Door Components
NOTE:
The illustration shows the left side. The right side is identical.
- Front Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Adjusting. Refer to DOOR, ADJUSTING .NOTE:
From 10/2015 the inner cover for the exterior rearview mirror and the holes in the doors is discontinued.
If a new door is installed on vehicles with a cover, adapt and install the cover.
- Sticker
- 28 mm diameter
- Use commercially available duct tape if needed
- Insulation
- self-adhesive
- Installing:
-- Cut to size if necessary, 200 mm x 100 mm. Position as shown in the image.
-- Warm using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A and then press firmly onto the outer door panel.
- Door Inner Cover
- Removing and Installing. Refer to DOOR INNER COVER, REMOVING AND INSTALLING .
- Outer Door Seal
- For 4-door
- Removing and Installing. Refer to OUTER DOOR SEAL, REMOVING AND INSTALLING .
- Outer Door Seal
- For 2-door
- Removing and Installing. Refer to OUTER DOOR SEAL, REMOVING AND INSTALLING .
- Sticker
- 32 mm diameter
- Use commercially available duct tape if needed
- Insulation
- self-adhesive
- Installing:
-- Cut to size if necessary, 250 mm x 160 mm. Position as shown in the image.
-- Warm using the Wiring Harness Repair Set - Hot Air Blower: VAS1978/14A and then press firmly onto the outer door panel.
- Sticker
- 19 mm diameter
- Use commercially available duct tape if needed
- Inner Window Shaft Strip
- Removing and Installing. Refer to INNER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
- Outer Window Shaft Strip
- Removing and Installing. Refer to OUTER WINDOW SHAFT STRIP, REMOVING AND INSTALLING .
- Window Guide
- Removing and Installing. Refer to WINDOW GUIDE, REMOVING AND INSTALLING .
- Sticker
- Quantity: 3 for 4-door
- Quantity: 4 for 2-door
- 15 mm x 50 mm
- Use commercially available duct tape if needed