LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2018 >> Tiguan S, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing >> 37 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Tightening Specifications: Notes

GWWN37-10590Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Item Bolt Nm
1 and 2 M 12x45 80
  • Using the Insert Tool - 18mm T10179 or T10509: >>65 Nm<<
3 M12x65 with nut 80
4 M 12x45 80
5, 6, 7, 8 M10 x 45 40
9 1) M12 x 70 80
A 2) Alignment sleeves for centering
  • 1) does not apply to 2.0L engine.
  • 2) alignment sleeves for the 2.0L engine are located at items 3 and 8.
Component Nm
Subframe mount to transmission (replace the bolts after removal) 60 + 90° additional turn
Ground cable to subframe mount 25
Drive plate to torque converter 57
Right drive axle heat shield to bevel box 20
Driveshaft to bevel box Refer to OVERVIEW - DRIVESHAFT .
Bevel box to transmission
  • Replace the bolts after removing them.
 40 Nm + 90° additional turn
scientia non olet · About LEMON Manuals