Engine, Securing To Engine And Transmission Holder: Procedure

• The transmission is separated from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Engage the :2024A  onto the engine and onto the :VAS6100  .

Fig 1: Engine Lifted

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- To be aligned to the center of gravity of the engine assembly, the hole rails must be inserted as shown in the illustration.

-- Secure the mounting hooks and pins on the engine support bridge using securing pins -arrows-.

-- Lower the engine from the :VAS6931  using the :VAS6100  .

-- Remove the transmission alignment sleeve and secure the transmission side of the engine on the :VAS6095A  .

Fig 2: Identifying Engine And Transmission Holder

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.